Instantaneous Electris Detonators offer a reliable means of controlled, simulaneous initiation of an explosive charge. They are manufactured in No.8 strength in Aluminum shells. The shells are fitted with electrical Fuse Heads. Precise consistency of the unique design of the Fuse Head is maintained by a fully automated process. PVC coated leg wires are sleeved through a PVC plug and crimped to the Detonator to ensure protection against moisture and water. The leg wires are water proof, ruggedly abrasion resistant, easy to shrip and handle. The bare ends of the leg wires are shunted for protectionagainst stray currents.
25 Detonators are made into a bundle and two such bundles (50 No.s) are wrapped in kraft paper to make it into a packet. 30 such packets will be placed in a corrugated card board box.
The Aluminum Super Electric Detonators can be used in quarrying, opencast, boulder blasting, nongassy underground mines and many other types of blastings. Instantaneous Electric in alluminum shell have wide range of applications in quarrying,opencast and underground non-gassy mine.
Make sure that all connections are made with clean bare wire ends and if necessary freshly expose bare wire.
Make sure thatthe bare ends do not come in contact with any conductors such as power lines, pipes, rails or other paths of stray current.
Make sure that the shotfiring cable is connected to the exploder just before firing the shot and is immediately disconnected after the shot is fired. The exploder key must always be in the possession of the blaster and not kept on the machine.
Ensure that the exploder used is of adequate capacity and the current is of the desired magnitude for full initiation of the round.
Check the circuit for continuity before firing the shots. This must be done using only "BLASTERS" ohm-meter.
Do not untwist the shunted ends of leg wires until just before connections are made.
Do not carry out shot firing in outside work area when an electrical storm is raging. Induced currents may set of sensitive detonators.
Do not connect detonators of different manufactures or firing characteristics in the same circuit/series.
Do not connect more detonators in one round than the capacity of the exploder.
As per IMDG (International Maritine Dangerous Goods) Classifications
Class: 1, Division: 1.1, Group: B, Un No.: 0030, Page No.: 1257, Storage Category: II TYPE 'C'
As per PESO (Petroleum and Explosives Safety Organization) Classifications
ID No.: 902, Class: 6, Division: 3, Category:ZZ
Alice said: The goods are issued very fast!
Andrew said: The packaging of the goods is very strong.
Ethan said: This cooperation is very enjoyable!
Michael said: Very good cooperation!
Jessica said: The trading process is very smooth!
Amanda sadi: The quality of the goods is good.
Fern said: Cooperation is very happy.
William said: The communication is very smooth and the delivery is fast!
Feynman said: The goods are transported very quickly!
Daniel said: Cooperation is very enjoyable.
Alex said: Happy cooperation!
Mlke said: The shipping package is very strict.
Paul said: Cooperation is very happy.
Bella said: The packaging of the goods is very strong.
Joshua said: Very good cooperation.
James said: The quality of the goods is very good, the cooperation is very happy!
Alva said: The quality of the goods is very good! The packaging is very strict.
Ella said: The trading process is very smooth.
Ollie said: The cooperation is very happy!
Bill said: This is the best seller we have worked with.
Linda said: The quality of the goods is very good!
Bieber said: The cooperation is very smooth.
Simon said: Very satisfied seller.
If you want to ask anything just fill in the form below and send us.
Instantaneous Electric Detonators offer a reliable means of controlled, simultaneous initiation of an explosive charge. They are manufactured in No.8 strength in Aluminum shells. The shells are fitted...>More >>